An inverter battery may remain idle for long periods, but it must be ready to deliver backup whenever a power cut occurs. Whether you run an inverter battery for home or for a shop, basic care decides how ready it is when that happens. This guide explains why maintenance matters, what to check and how often, and which maintenance features Okaya builds into its batteries.
Regular checks help in four practical ways.
|
Reason |
What goes wrong without care |
What regular checks help with |
|
Readiness |
A neglected battery may not deliver the backup you expect when an outage starts |
Catching low electrolyte or weak performance before the next power cut |
|
Backup life |
Low water levels and dirty or corroded terminals can reduce performance over time |
Keeping the battery working closer to its rated capacity |
|
Safety |
Gas build-up, leakage and damaged casings are risks in a poorly kept battery |
Spotting leakage, damage and blocked ventilation early |
|
Warranty |
Warranty terms can carry conditions on how the battery is used and kept |
Staying within the conditions listed in the warranty information |
For the conditions that apply to your battery, read Okaya's warranty information.
These habits cover most of what a tubular inverter battery needs.
1. Check the electrolyte level regularly and keep it between the minimum and maximum marks. Top up only when needed, using the water type recommended in the product manual or by Okaya Care.
2. Keep the battery clean and dry. Wipe the casing with a dry cloth to remove dust.
3. Look at the terminals. If you see white powder or heavy corrosion, do not scrape it yourself; ask Okaya Care or a service technician to clean it.
4. Keep the battery in a ventilated place, because batteries can release gases while charging.
5. Check for visible damage, swelling or leakage, and act on it early.
6. Keep the inverter and battery matched in system voltage, so the battery bank is charged the way it is designed to be.
Advanced Electrolyte Management (AEMS): six ceramic water-level indicators let you see the electrolyte level without opening the cells, and topping is spill-free.
Low-antimony alloy: Okaya lists 1 to 2 water top-ups a year on most models.
Spill-free design: TT batteries use a vent-plug and float design. SJT batteries use a 6x1 layout with all water inlets on one side.
XBD+ and CBH: Okaya states XBD+ technology gives up to 15 to 20% longer backup than a conventional tubular battery of the same Ah capacity. Certified Backup Hours are backup times declared at set loads, tested under the UMHD (Urban Metro Heavy Duty) load cycle in NABL-accredited laboratories and printed on the packaging.
CBH figures give you a reference point. Real backup still varies with load, temperature and battery age, so a clear drop below what you used to get is a signal to have the battery checked.
For how maintenance connects to service life, see how long an inverter battery lasts.
Capacity should follow your load and the backup hours you want. Okaya's suggested use by capacity is 90Ah for compact needs, 160Ah for a 2BHK home, 210Ah for larger homes or longer backup, 260Ah for heavy loads and 310Ah for commercial use. The 160Ah capacity is offered in SJT models with 48 or 60 months of total warranty and in TT models with 54 or 60 months.
You can compare options on the home inverter battery capacity listing, and the guide on which inverter battery is best for home explains how to match a battery to your appliances.
Contact Okaya Care on +91 9818 909090 or care@okaya.in if you notice any of the following: backup that is clearly shorter than before, leakage or visible damage, heavy corrosion on the terminals, or an electrolyte level that keeps dropping. You can also find a service point through the dealer locator.
How often does an Okaya inverter battery need water topping?
Okaya lists 1 to 2 water top-ups a year on most models. Check the ceramic water-level indicators regularly and top up only when the level needs it.
What water should I use to top up an inverter battery?
Use only the water type recommended for your battery in the product manual or by Okaya Care, and do not overfill beyond the maximum mark.
How do I know if my inverter battery needs attention?
Signs include backup that is noticeably shorter than before, leakage or visible damage, heavy corrosion on the terminals and a falling electrolyte level. Contact Okaya Care if you notice any of these.
Can I clean the battery terminals myself?
You can wipe the casing with a dry cloth. If the terminals show white powder or heavy corrosion, ask Okaya Care or a service technician to clean them.
Does maintenance affect the warranty?
Warranty terms can carry conditions on how the battery is used and kept. Read the warranty information for your battery, and keep your registration details. Okaya offers paperless warranty registration.
What are Certified Backup Hours?
They are backup times Okaya declares at set loads, tested under the UMHD load cycle in NABL-accredited laboratories. They help compare batteries, but real backup varies with load, temperature and battery age.
Which Okaya battery capacity suits a 2BHK home?
Okaya suggests 160Ah for a 2BHK home. Your own appliance load and the backup hours you want should decide the final choice.
To compare current figures, check the battery price list on the Okaya shop, including the Okaya battery 160Ah price for 2BHK homes and the inverter battery rate for other capacities. To find a service point or dealer, use the dealer locator.
OKAYA POWER PVT. LTD.
ENERGIS D-7, 3rd & 4th Floor, Rohtak Rd,
Udyog Nagar, Mangolpuri,
New Delhi - 110041, INDIA
© 2026 All Rights Reserved to Okaya Power Private Limited
